Tanker Endorsement


Effective in all states as of July 8, 2015, shippers moving contained liquids in dry van trailers and intermodal containers must now comply with tank endorsement rules.

Published in 2011 by the Federal Motor Carrier Safety Administration (FMCSA), his rule redefined what is considered to be a tank and for the first time includes capacity requirements. Under the new rule, a tank is: 1) “Any commercial vehicle that is designed to transport any liquid or gaseous material within a tank or tanks having an individual rate capacity of more than 119 gallons,” and 2) “An aggregated capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis.” Tanks that are manifested either as being “Empty” or as “Residue Last Contained” on a bill of lading do not apply under the rule.

In addition to defining a tank, the tank endorsement rule is designed to educate drivers about controlling the effects of surge inherent in transporting a large amount of liquid. Surge occurs when liquid changes position based on gravity or other momentum, such as when a vehicle accelerates or decelerates.

If a load meets these newly defined capacity and configuration requirements, it must be transported by a driver with a “tank endorsement” on his or her CDL. Moving a load without the proper endorsements could cause significant shipping delays if the driver is found in violation and placed out of service. This enforcement is driving the need to more aggressively work toward compliance and awareness.


Endorsement Requirements

The new official definition of a tank has led to confusion regarding which drivers are required to have a tank endorsement on his or her CDL. Issued by passing a tank knowledge test, the endorsement ensures that a driver can react to those situations when there is a risk of surge and where there is a higher center of gravity. Drivers must acquire a tank endorsement from the state that grants the CDL.

To help clarify which shipments require drivers to obtain a tank endorsement and what quantity amounts apply, the FMCSA has issued regulatory guidance on the rule:

Types of drivers requiring the endorsement

  • Drivers transporting any liquids in tanks that are either permanently or temporarily attached to the vehicle or the chassis and exceeds 1,000 gallons in total, or any liquid or gaseous material in a permanent tank that exceeds 1,000 gallons total
  • Drivers hauling filled cylinders (containers used to haul industrial gas) or intermediate bulk containers (IBC), which are shipped in a van and exceed 1,000 gallons
  • Drivers conveying multiple IBCs that are greater than 119-gallon capacity and have a total capacity of 1,000 gallons or more and that are strapped, chained or otherwise secured to a vehicle
  • Less-than-truckload drivers carrying bulk liquids in greater than 119-gallon capacity and have a total capacity of 1,000 gallons or more

The Regulation Exposes Shippers and Carriers to Risk

Since the rule has been published, the industry has encountered three major obstacles:

Exacerbated driver capacity crunch: Because the new rule requires more drivers to secure a CDL tank vehicle endorsement, fewer current drivers can legally carry the containers.

Increased load replanning: Shippers working with for-hire carriers are not clearly identifying which freight requires a tank vehicle endorsement. By doing so, drivers who are initially assigned to pick up the freight are unqualified, requiring a different driver to be assigned.

Higher rate of out-of-service trucks: In addition to load replanning, inappropriately marked shipments being hauled by uncredentialed drivers have led to drivers being immediately placed out of service at roadside inspections, significantly delaying delivery time(s).

Schneider's Position

Now that the tank endorsement rule has taken effect, the associated challenges are evolving and compounding for drivers and shippers.

To overcome these hurdles, Schneider strongly encourages shippers to be aware and thoroughly understand the tank definition. When working with a carrier, shippers should fully disclose the type of freight that needs to be transported, how it is packaged and the freight’s volume. For an illustrated guideline, view our infographic “Does Your Freight Require A Tank Endorsed Driver?”

Shippers should also be aware that some carriers will not have the dry van fleet capacity to move these types of loads. In these situations, shippers should work with carriers like Schneider that can supply tank endorsed drivers and that offer a broad portfolio of services, such as a dedicated fleet or intermodal service.

Published November 2015

Dual Photo

Ask a Subject Matter Expert.

If you can't find an answer to your question in our Knowledge Hub library, we invite you to ask one of our subject matter experts. One of our experts will respond to you within 48 hours.

Ask Now

While Your Mind's On Freight, Consider This.

As a premier transportation and logistics provider, Schneider offers tailored Dry Van Truckload, truck-like Intermodal, Bulk and Dedicated solutions with 19 equipment configurations that keep your freight safe, secure and on time.

Learn More
Dual Texture Image

Get a Rate.

It's fast, it's easy and we'll give you answers and options you can use.

Why wait? Get a rate.